Loading ...
Loading ...
Loading ...
To install the crossbars, refer to the following
procedure:
1. Remove the crossbars from the foam blocks.
2. Swivel the outboard stanchion on the crossbar and
rotate it 180 degrees around the bolt to the open
position. Open the outboard stanchion on the oppo-
site end of the crossbar as well.
3. Using the provided Torx wrench, loosen the Torx
bolts on both ends of the crossbar.
4. Using the provided wrench and fasteners, bolt the
fasteners to the side rail.
NOTE:
An indicator on the wrench will show when the fas-
tener is tightened to the indicated torque specifica-
tion. The slanted line will line up with the arrow
when torquing.
5. Tighten down the Torx head bolts on the inboard
stanchion.
Step 2
Open Outboard Stanchion (Underside Shown)
Step 3
Torque Wrench Indicator
Step 4
Step 5
GETTING TO KNOW YOUR VEHICLE 89
2
Loading ...
Loading ...
Loading ...