Loading ...
Loading ...
Loading ...
Third Row Head Restraints
The head restraint in the center position can be raised
and lowered for tether routing or height adjustment
page 243.
NOTE:
The center head restraint should only be removed by
qualified technicians, for service purposes only. If the
head restraint requires removal, see an authorized
dealer.
The third row outboard head restraints are not adjust-
able or removable, but can be folded for improved vis-
ibility when the vehicle is in REVERSE, and there are no
occupants in the seats.
Press the Headrest Fold button within the
Controls menu of the Uconnect system to
power fold the third row head restraints.
The head restraints will also automatically fold when
the seatbacks are folded forward using the release
handles on the backs of the seats from the cargo area.
NOTE:
•
The head restraints must be raised manually when
occupying the third row.
•
Do not fold if there are passengers seated in the
third row seats.
WARNING!
•
All occupants, including the driver, should not oper-
ate a vehicle or sit in a vehicle’s seat until the
head restraints are placed in their proper positions
in order to minimize the risk of neck injury in the
event of a crash.
•
Head restraints should never be adjusted while the
vehicle is in motion. Driving a vehicle with the head
restraints improperly adjusted or removed could
cause serious injury or death in the event of a
collision.
UCONNECT VOICE RECOGNITION QUICK
TIPS — IF EQUIPPED
INTRODUCING VOICE
RECOGNITION
Start using Uconnect Voice Recognition with these help-
ful quick tips. It provides the key Voice Commands and
tips you need to know to control your vehicle’s Voice
Recognition (VR) system.
BASIC VOICE COMMANDS
The following basic voice commands can be given at
any point while using your Uconnect system.
Push the VR button
or say the vehicle’s Wake Up
word “Hey Uconnect”. The factory default Wake Up word
is set to “Hey Uconnect” and can be reprogrammed
through the Uconnect Settings. After the beep, say:
•
“ Cancel” to stop a current voice session.
•
“ Help” to hear a list of suggested Voice Commands.
•
“ Repeat” to listen to the system prompts again.
Notice the visual cues that inform you of your Voice
Recognition system’s status.
GET STARTED
The VR button is used to activate/deactivate your
Voice Recognition system. You can also use the sys-
tem’s Wake Up word to activate voice recognition. The
Wake Up word can be set through the Uconnect Set-
tings
page 182.
Helpful hints for using Voice Recognition:
•
Reduce background noise. Wind noise and passen-
ger conversations are examples of noise that may
impact recognition.
•
Speak clearly at a normal pace and volume while
facing straight ahead.
•
Each time you give a Voice Command, first push the
VR button
or say the Wake Up word, wait until
after the beep, then say your Voice Command.
•
You can interrupt the help message or system
prompts by pushing the VR button and saying a
Voice Command from the current category.
Center Head Restraint Adjustment Button
GETTING TO KNOW YOUR VEHICLE 47
2
Loading ...
Loading ...
Loading ...