Loading ...
Loading ...
Loading ...
Safety—Safety Signs and Other Instructions
KR46761,0001364 -19-13JUN19-49/69
KR46761,0001364 -19-13JUN19-50/69
Continued on next page KR46761,0001364 -19-13JUN19-51/69
12. CAUTION, Pressurized Tank
PRESSURIZED TANK CAP REMOVAL
1. Insert 4 mm Allen Wrench in base and turn to
release locking pin.
2. Slowly turn cap counter clockwise a few degrees
to relieve pressure. Pressure may suddenly cause
cap to lift off tank.
3. To replace, align notches and turn clockwise.
This safety label is located on top of the hydraulic tank
cap.
TX1227371 —19—31OCT16
CAUTION, Pressurized Tank
13. CAUTION, Hydraulic Reservoir Cap
•
Before removing hydraulic reservoir cap and air
breather always stop engine.
•
Do not remove cap when oil temperature is hot.
•
Do not loosen drain plug when oil temperature is hot.
This safety label is located on top of the hydraulic tank.
TX1212346 —19—09MAR16
CAUTION, Hydraulic Reservoir Cap
14. CAUTION, Prevent Machine Fires
PREVENT MACHINE FIRES
Keep engine compartment and other machine areas
free of trash and debris. Clean daily.
Check for fuel or oil leaks every day. Repair and clean
up spills immediately.
Keep re extinguishers on machine and properly
maintained. Recharge immediately after use.
This safety label is located inside the left front service
door and right rear service door.
TX1210058 —19—17FEB16
CAUTION, Prevent Machine Fires
1-5-21
112321
PN=85
Loading ...
Loading ...
Loading ...