Loading ...
Loading ...
Loading ...
Operation—Operator's Station
Continued on next page KR46761,00011AB -19-03AUG17-1/2
Adjusting the Air Suspension Seat
Air Suspension Seat With Heater
CAUTION: Prevent possible injury. Do not adjust
seat settings while operating the machine.
With the machine parked and the operator in the operator’s
seat (1), pull and release the weight and height adjustment
lever (7) to adjust the seat for the operator’s weight.
The seat height can be set pneumatically and is
continuously adjustable. Pull or push weight and height
adjustment lever fully up or down and release lever to
select desired seat height.
The seat heater switch (3) has two positions: OFF and
ON. Turn the seat heater switch to desired setting.
Turn lumbar adjustment knob (4) clockwise to increase
lumbar support. Turn lumbar adjustment knob
counterclockwise to decrease lumbar support.
Pull up on backrest lever (5) to release backrest lock.
Move backrest to desired position. Release lever.
The seat fore-and-aft isolator lever (if equipped) (6) has
two positions: OFF and ON. Under certain operating
conditions, having the seat fore-and-aft isolator lever in
the ON position will absorb fore and aft impacts to the
operator’s seat.
Adjust suspension rmness of seat for a comfortable ride.
The adjustable damper lever (8) controls suspension
rmness of the seat. The adjustable damper lever has
three positions. Pull up on lever to decrease suspension
rmness. Push down on lever to increase suspension
rmness.
Pull up on seat fore-and-aft lever (9) to unlock seat. Slide
seat to desired distance from pilot control levers. Release
lever.
Pull up on seat pan angle adjustment handle (10) and
apply pressure to front or rear part of the seat to adjust
seat pan angle. Release handle.
TX1215786 —UN—16MAY16
Air Suspension Seat With Heater
1— Operator’s Seat
2— Headrest
3— Seat Heater Switch
4— Lumbar Adjustment Knob
5— Backrest Lever
6— Seat Fore-and-Aft Isolator
Lever (if equipped)
7— Weight and Height
Adjustment Lever
8— Adjustable Damper Lever
9— Seat Fore-and-Aft Lever
10— Seat Pan Angle
Adjustment Handle
11— Seat Depth Adjustment
Handle
12— Armrest (2 used)
13— Armrest Dial (2 used)
Pull up on seat depth adjustment handle (11) and slide
seat cushion to desired distance from pilot control levers.
Release handle.
Pull headrest (2) upward or push downward to desired
height. Move headrest to desired angle.
Pull up on armrests (12) to move armrests out of the way
when exiting the cab.
Turn armrest dials (13) to adjust angle of armrests.
2-1-26
112321
PN=119
Loading ...
Loading ...
Loading ...