Loading ...
Loading ...
Loading ...
Maintenance—Every 5000 Hours
KR46761,0001397 -19-21DEC16-2/2
TX1217987 —UN—22JUN16
Access Cover (view from under machine)
TX1226243 —UN—14OCT16
Drain Valve Cap Screw (view from under machine)
8. Underneath right side of machine, remove cap screws
(8) and access cover (9) to access drain valve cap
screw.
9. Remove drain valve cap screw (10). Allow oil to drain
into a container. Dispose of waste oil properly.
10. Install drain valve cap screw.
11. Remove suction screen from hydraulic tank cover.
Clean inside of tank and suction screen.
NOTE: The hydraulic tank oil lter and pilot oil lter can
be changed at this point in the procedure. See
Maintenance—Every 1000 Hours. (Section 3-10.)
12. Install suction screen with hydraulic tank cover and
cap screws. Suction screen must seal against outlet
pipe in bottom of tank. If necessary, loosen suction
screen rod nut (12) to adjust rod length.
Specication
Suction Screen Rod
(11)—Length................................................................................ 869 mm
34 in
Suction Screen Rod Nut
(12)—Torque......................................................................... 15—20 N·m
133—177 lb·in
Hydraulic Tank Cover
Cap Screw—Torque......................................................................50 N·m
37 lb·ft
IMPORTANT: If the hydraulic pump is not lled with
oil, it will be damaged when the engine is started.
13. Add oil until it is between marks on sight glass. See
Hydraulic Oil. (Section 3-1.)
Specication
Hydraulic Tank
Oil—Capacity............................................................................... 147.6 L
39.0 gal
14. Install hydraulic tank cap (1) to case assembly (4)
using aligning marks (5) and turning cap clockwise
to lock position.
15. Bleed air from hydraulic system. See Bleed Hydraulic
System. (Section 4-1.)
12
11
TX1218002 —UN—24JUN16
Suction Screen Assembly
1
4
3
2
5
TX1217692 —UN—22JUN16
Hydraulic Tank Cap
1— Hydraulic Tank Cap
2— Hex Wrench
3— Hole
4— Case Assembly
5— Aligning Mark (2 used)
8— Cap Screw (4 used)
9— Access Cover
10— Drain Valve Cap Screw
11— Suction Screen Rod
12— Suction Screen Rod Nut
3-15-2
112321
PN=258
Loading ...
Loading ...
Loading ...