Loading ...
Loading ...
Loading ...
Safety—Maintenance Precautions
MM16284,0001CDA -19-27OCT15-1/1
MM16284,0001CDB -19-28APR15-1/1
MM16284,0001E1B -19-27OCT15-1/1
MM16284,0001E1C -19-28APR15-1/1
Precautions for Welding and Grinding
Welding may generate gas and/or small res.
•
Be sure to perform welding in a well ventilated and
prepared area. Store ammable materials in a safe
place before starting welding.
•
Only qualied personnel should perform welding. Never
allow an unqualied person to perform welding.
•
Turn the battery disconnect switch to the OFF position
before operating the machine.
Grinding on the machine may create re hazards. Store
ammable materials in a safe place before starting
grinding.
After nishing welding and grinding, recheck that there
are no abnormalities such as the area surrounding the
welded area still smoldering.
TX1094280 —UN—28JUN13
Avoid Heating Near Pressurized Fluid Lines
Flammable spray can be generated by heating near
pressurized uid lines, resulting in severe burns to
yourself and bystanders.
•
Do not heat by welding, soldering, or using a torch near
pressurized uid lines or other ammable materials.
•
Pressurized lines can be accidentally cut when
heat goes beyond the immediate ame area. Install
temporary re-resistant guards to protect hoses or other
materials before engaging in welding, soldering, etc.
TX1094281 —UN—28JUN13
Avoid Applying Heat to Lines Containing
Flammable Fluids
•
Do not weld or ame cut pipes or tubes that contain
ammable uids.
•
Clean pipes and tubes thoroughly with non-ammable
solvent before welding or ame cutting.
Precautions for Handling Accumulator and
Gas Damper
High-pressure nitrogen gas is sealed in the accumulator
and the gas damper. Inappropriate handling may cause
explosion, possibly resulting in serious injury or death.
Strictly comply with the following items:
•
Do not disassemble the unit.
•
Keep the units away from open ames and re.
•
Do not bore a hole, do not cut by torch.
•
Avoid giving shocks by hitting or rolling the unit.
•
Before disposing the unit, sealed gas must be released.
Consult your authorized dealer.
1-4-3
112321
PN=61
Loading ...
Loading ...
Loading ...