Loading ...
Loading ...
Loading ...
Maintenance—Periodic Maintenance
KR46761,000114A -19-10NOV16-1/1
KR46761,0001381 -19-19SEP16-1/1
Cab Tilting Procedure—Rear Entry Cab Only
Lowering Cab for Transport
1. Remove or secure any loose objects inside the cab.
2. Turn key switch to OFF position and close cab door.
3. Open cab service door (1).
4. Remove cab riser hold-down bolts (2) and place in
storage slots (4) on the frame.
5. Close cab service door.
6. Open left rear service door to access the cab tilt switch
(3).
CAUTION: Prevent possible injury from crushing
or falling objects. Clear area of all bystanders
before operating the cab tilt switch.
7. Press and hold cab tilt switch in the LOWER position
to lower the cab and riser. When the tether cable is
taut, release switch.
8. Close service door.
Raising Cab for Operation
1. Open left rear service door to access the cab tilt switch.
CAUTION: Prevent possible injury from crushing
or falling objects. Clear area of all bystanders
before operating the cab tilt switch.
2. Press and hold cab tilt switch in the RAISE position
to raise the cab and riser.
3. Open cab service door.
4. Install cab riser hold-down bolts and tighten to
specication.
Specication
Cab Riser Hold-Down
Bolts—Torque..............................................................................678 N·m
500 lb·ft
5. Close service doors.
TX1213788 —UN—26APR16
Cab Service Door
TX1213785 —UN—31MAY16
Cab Riser Hold-Down Bolts
TX1213786 —UN—26APR16
Cab Tilt Switch
1— Cab Service Door
2— Cab Riser Hold-Down Bolt
(4 used)
3— Cab Tilt Switch
4— Storage Slot (4 used)
Fuel Tank
CAUTION: Fuel is ammable and may ignite if
spilled on hot engine. To prevent injury, handle
fuel carefully. If engine is hot or running, DO NOT
ll the fuel tank. DO NOT smoke while lling
fuel tank or working on fuel system.
IMPORTANT: Avoid engine damage. If machine has
run out of fuel, engine will not start. Contact an
authorized Hitachi dealer for instructions.
To avoid condensation, ll the fuel tank at the end of each
work day. Shut off engine before lling.
3-2-5
112321
PN=197
Loading ...
Loading ...
Loading ...