Loading ...
Loading ...
Loading ...
Operation—Operator's Station
KR46761,0001140 -19-14MAR16-1/1
Continued on next page KR46761,0001112 -19-04AUG21-1/3
Fire Extinguisher Mounting Location
MOUNTING LOCATION:
On both the rear entry and side entry cabs, the designated
re extinguisher mounting location (1) is inside the cab
door on the right side.
USE:
NOTE: All re extinguishers do not operate the same.
Read operating instructions on canister.
The portable re extinguisher is used to aid in the
extinguishing of small res. Refer to individual
manufacturer’s instructions and proper re ghting
procedures before the need to use the re extinguisher
arises. See Prevent Fires. (Section 1-2.)
MAINTENANCE:
IMPORTANT: Avoid possible machine damage. Check
gauge (if equipped) on re extinguisher. If re
extinguisher is not fully charged, recharge
or replace re extinguisher according to the
manufacturer’s instructions.
Inspect and maintain the re extinguisher following the
manufacturer’s recommendations and all local, regional,
and national regulations.
1— Fire Extinguisher Mounting
Location
TX1212613 —UN—14MAR16
Rear Entry Cab
TX1212614 —UN—22MAR16
Side Entry Cab
Alternative Exit
Rear Entry Cab—Lever Latch
The skylight provides an alternative exit path if the cab
door is blocked in an emergency situation.
Remove pins (1), release latches (2), and push on skylight
pane to remove and to open exit path.
1— Pin (2 used) 2— Latch (2 used)
TX1213130 —UN—21MAR16
Alternative Exit
2-1-24
112321
PN=117
Loading ...
Loading ...
Loading ...