Loading ...
Loading ...
Loading ...
Miscellaneous—Machine
KR46761,000127F -19-05JUL16-1/1
TD48962,0000228 -19-08SEP20-1/1
Removing the Bucket—If Equipped
1. Lower bucket to the ground.
2. Remove snap rings and locking pins.
3. Slide O-ring seals out of way. Remove bucket pins.
Inspect Seat Belt
CAUTION: Prevent personal injury. Check
condition of seat belt and mounting hardware
before operating machine. Replace if worn,
frayed, or damaged.
Replace seat belt at least every 3 years,
regardless of condition.
1. Examine seat belt (1) webbing for cuts, fraying,
extreme, or unusual wear.
2. Inspect buckle (2) for damage. Insert tongue (3) into
buckle, listen for an audible “click” sound, and tug on
the belt to ensure the belt is properly latched.
3. Examine seat belt for wires that are exposed, frayed,
or broken if belt is equipped with electrical wires.
4. Check seat belt retractor (4) by slowly pulling the belt
and releasing to verify the webbing spools out and
retracts without locking.
5. Examine seat belt mounting hardware attachment
points for rust, corrosion, looseness, or missing
hardware.
1— Seat Belt
2— Buckle
3— Tongue
4— Retractor
5— Right Seat Belt-to-Seat Cap
Screw
6— Seat Belt Switch Connector
7— Left Seat Belt-to-Seat Cap
Screw
TX1300689 —UN—22JUL20
2-Point Seat Belt (retractor side shown)
TX1300690 —UN—22JUL20
2-Point Seat Belt (buckle side shown)
4-1-16
112321
PN=276
Loading ...
Loading ...
Loading ...