Loading ...
Loading ...
Loading ...
Miscellaneous—Operational Checkout
KR46761,0001414 -19-01AUG18-1/50
KR46761,0001414 -19-01AUG18-2/50
KR46761,0001414 -19-01AUG18-3/50
Continued on next page KR46761,0001414 -19-01AUG18-4/50
Operational Checkout
This procedure is used to check operation of machine.
The procedure is designed so the operator can do a
walk-around inspection, check machine operation, and
perform specic checks from the operator's seat.
If there is a problem with machine, diagnostic information
in this checkout will help pinpoint the probable cause.
This information may allow the operator to perform a
simple adjustment to correct the problem. Use the table of
contents to help nd adjustment procedures.
A location will be required which is level and has adequate
space to complete checks. No tools or equipment are
needed to perform checkout.
Complete necessary visual checks (oil levels, oil condition,
external leaks, loose hardware, linkage, and wiring) prior
to doing checkout. The machine must be at operating
temperature for many of the checks.
Read each check completely before performing. If no
problem is found, the operator will be instructed to go to
the next check. If a problem is indicated, the operator
will be referred to a procedure for adjustment, repair, or
replacement.
The monitor can be used to perform diagnostic and
operational checks. The monitor can display engine
speed, pressures, and diagnostic trouble codes (DTCs).
Diagnostic Trouble Code Check
Display and Clear
Trouble Codes
Always check for diagnostic trouble codes (DTCs) and correct them before performing
operational checkout.
Diagnostic trouble codes can be displayed by using one of the following methods:
•
Monitor
•
With Service ADVISOR™
•
MPDr
YES: Correct all
diagnostic trouble codes
before proceeding.
LOOK: Are diagnostic trouble codes present? NO: Proceed with
operational checkout.
Service ADVISOR is a trademark of Deere & Company
Operational Checks—Key Switch Off, Engine Off Checks
4-2-1
112321
PN=281
Loading ...
Loading ...
Loading ...