Loading ...
Loading ...
Loading ...
Operation—Monitor Operation
CN93077,0000581 -19-12JAN16-1/1
Main Menu—Setting Menu—Aftertreatment
Device Regeneration Inhibit
CAUTION: Servicing machine during
aftertreatment device regeneration can result in
serious personal injury. Avoid exposure and skin
contact with hot gases and components.
During aftertreatment device regeneration,
the engine may run at elevated idle and
hot temperatures for an extended period of
time. Aftertreatment gases and aftertreatment
device components may reach temperatures
hot enough to burn people and ignite or
melt common materials.
NOTE: Inhibiting aftertreatment device regeneration is
not preferred. Whenever possible, aftertreatment
device regeneration inhibit should not be enabled
to keep soot buildup to a minimum and to
increase overall machine uptime.
If operating in conditions where it may be unsafe
for elevated aftertreatment device temperatures,
auto-regeneration of the aftertreatment device
regeneration can be disabled.
The Aftertreatment Device Regeneration Inhibit menu
allows the operator to enable or disable the aftertreatment
device auto-regeneration inhibition.
At Setting Menu, rotate monitor dial to highlight
Aftertreatment Device Regeneration Inhibit. Press monitor
dial to display Aftertreatment Device Regeneration Inhibit
menu:
NOTE: To disable aftertreatment device auto-
regeneration, ON (enable) needs to be selected.
□ ON (Enable)
Press monitor dial to turn ON (enable) to disable
aftertreatment device auto-regeneration.
Press monitor dial again to enable aftertreatment
device auto-regeneration. Press Back button to return
to previous screen. Press Home button to return to
default screen.
NOTE: When aftertreatment device auto-regeneration
is disabled, the color of the preceding
24
.
0
˚C
81.3
10:00
ECO
ST
MHz
VOL
FM
50.0h
AM
F
E
C
H
CH1
F
E
1
TX1192144 —UN—05MAY15
Aftertreatment Device Regeneration Inhibit Indicator
24
.
0
˚C
81.3
10:00
ECO
ST
MHz
VOL
FM
50.0h
AM
F
E
C
H
CH1
F
E
2
TX1192145 —UN—05MAY15
Aftertreatment Device Regeneration Indicator
1— Aftertreatment Device
Regeneration Inhibit
Indicator
2— Aftertreatment Device
Regeneration Indicator
square is green and aftertreatment device
regeneration inhibit indicator (1) will appear
on the default screen.
When aftertreatment device auto-regeneration
is enabled, the color of the preceding square is
gray and an aftertreatment device regeneration
indicator (2) will appear on the default screen when
an auto or manual regeneration is taking place.
Press back button to return to previous screen.
Press home button to return to default screen.
2-2-20
112321
PN=143
Loading ...
Loading ...
Loading ...