Loading ...
Loading ...
Loading ...
Maintenance—Every 1000 Hours
KR46761,000125C -19-21JUN16-1/1
KR46761,0001394 -19-22SEP16-1/1
Drain and Rell Pump Drive Gear Case Oil
1. Park machine on a level surface.
IMPORTANT: Turbocharger can be damaged
if procedure to shut down engine is
not done properly.
2. Run engine at slow idle speed without load for 5
minutes.
3. Stop engine.
4. Open right rear service door.
5. Remove ll plug (2).
6. Remove drain plug (3). Allow oil to drain into a
container. Dispose of waste oil properly.
7. Apply liquid pipe thread sealant to drain plug. Install
plug.
8. Add oil. See Pump Drive Gear Case Oil. (Section 3-1.)
Specication
Pump Drive Gear Case
Oil—Capacity................................................................................... 1.0 L
1.1 qt
9. Install ll plug.
10. Remove dipstick (1) and check oil level. Oil level must
be approximately halfway below H mark.
11. Install dipstick.
TX1217931 —UN—19JUL16
Pump Drive Gear Case
1— Dipstick
2— Fill Plug
3— Drain Plug
12. Close service door.
Check and Adjust Engine Valve Lash
See an authorized Hitachi dealer for engine valve
clearance adjustment.
3-10-8
112321
PN=247
Loading ...
Loading ...
Loading ...