Loading ...
Loading ...
Loading ...
Operation—Operator's Station
CN93077,0000583 -19-06MAY15-1/1
Aftertreatment Device Regeneration Switch
CAUTION: Servicing machine during
aftertreatment device regeneration can result in
serious personal injury. Avoid exposure and skin
contact with hot gases and components.
During aftertreatment device regeneration,
the engine may run at elevated idle and
hot temperatures for an extended period of
time. Aftertreatment gases and aftertreatment
device components may reach temperatures
hot enough to burn people and ignite or
melt common materials.
Avoid death or serious injury from machine
movement. Do not leave running machine
unattended during aftertreatment device
regeneration.
IMPORTANT: Avoid machine damage. Always
park machine in a safe location and check
for adequate fuel and diesel exhaust uid
(DEF) level before beginning aftertreatment
device regeneration.
The aftertreatment device regeneration switch (1) is
located on the right console.
Before starting the aftertreatment device regeneration
process, machine needs to be in a predetermined safe
state. This safe state includes three conditions:
•
Machine is parked in a safe place with the front
attachment lowered to the ground.
•
Pilot shutoff lever is in locked (UP) position.
TX1086795A —UN—11JAN11
Aftertreatment Device Regeneration Switch
1— Aftertreatment Device
Regeneration Switch
•
Engine speed dial is set to slow idle.
An aftertreatment device regeneration request will appear
on the monitor to inform the operator when a manual
regeneration needs to take place.
Once the safe state conditions are met, press and hold
the right half of aftertreatment device regeneration switch
for 3 seconds to begin a manual regeneration.
Monitor will show a progress screen during the
regeneration and will prompt the operator when the
regeneration is complete.
For more information, see Aftertreatment Device
Regeneration. (Section 2-3.)
2-1-12
112321
PN=105
Loading ...
Loading ...
Loading ...