Hitachi ZAXIS 260FLC-FE-6N

User Manual - Page 38

For ZAXIS 260FLC-FE-6N.

PDF File Manual, 383 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Safety—General Precautions
TX,PREVENT,BATT -19-24FEB20-1/1
MM16284,0001CD9 -19-07OCT14-1/1
MM16284,0001967 -19-26JUL12-1/1
Prevent Battery Explosions
Keep sparks, lighted matches, and open ame away from
the top of battery. Battery gas can explode.
Never check battery charge by placing a metal object
across the posts. Use a voltmeter or hydrometer.
Do not charge a frozen battery; it may explode. Warm
battery to 16°C (60°F).
Keep battery electrolyte levels properly maintained.
TS204 —UN—15APR13
Battery Explosions
Beware of Exhaust Fumes
Prevent asphyxiation. Engine exhaust fumes can cause
sickness or death.
If you must operate in a building, be sure there is
adequate ventilation. Either use an exhaust pipe
extension to remove the exhaust fumes or open doors
and windows to bring enough outside air into the area.
White smoke may be generated during the
aftertreatment device regeneration. Do not attempt
to do aftertreatment device manual regeneration in a
badly ventilated indoors.
TX1094279 —UN—28JUN13
Beware of Asbestos and Silicon Dust and
Other Contamination
Take care not to inhale dust produced in the work site.
Inhalation of asbestos bers may be the cause of lung
cancer. Inhalation of silicon dust or other contamination
may cause sickness.
Depending on the work site conditions, the risk
of inhaling asbestos ber, silicon dust or other
contamination may exist. Spray water to prevent
asbestos bers, silicon dust or other contamination from
becoming airborne. Do not use compressed air.
When operating the machine in a work site where
asbestos bers, silicon dust or other contamination
might be present, be sure to operate the machine
from the upwind side and wear a mask rated to
prevent the inhalation of asbestos, silicon dust or other
contamination.
TX1094282 —UN—28JUN13
Keep bystanders out of the work site during operation.
Asbestos bers might be present in imitation parts. Use
only genuine Hitachi parts.
1-2-8
112321
PN=36
Loading ...
Loading ...
Loading ...