Loading ...
Loading ...
Loading ...
Safety—General Precautions
MM16284,0001CD8 -19-07OCT14-1/1
Prevent Fires
Check for Oil Leaks: Fuel, hydraulic oil and lubricant
leaks can lead to res.
•
Check for oil leaks due to missing or loose clamps,
kinked hoses, lines or hoses that rub against each
other, damage to the oil cooler, and loose oil cooler
ange bolts.
•
Tighten, repair or replace any missing, loose or
damaged clamps, lines, hoses, oil cooler and oil cooler
ange bolts.
•
Do not bend or strike high-pressure lines.
•
Never install bent or damaged lines, pipes, or hoses.
•
Replace fuel hoses and hydraulic hoses periodically
even if there is no abnormality in their external
appearance.
Check for Shorts: Short circuits can cause res.
•
Clean and tighten all electrical connections.
•
Check before each shift or after eight (8) to ten (10)
hours operation for loose, kinked, hardened or frayed
electrical cables and wires.
•
Check before each shift or after eight (8) to ten (10)
hours operation for missing or damaged terminal caps.
•
DO NOT OPERATE MACHINE if cable or wires are
loose, kinked, etc.
•
Never attempt to modify electric wirings.
Clean up Flammable Materials: Spilled fuel and oil, and
trash, grease, debris, accumulated coal dust, and other
ammable materials may cause res.
•
Prevent res by inspecting and cleaning the machine
daily, and by removing adhered oil or accumulated
ammable materials immediately. Check and clean
high temperature parts such as the exhaust outlet and
mufers earlier than the normal interval.
•
Do not wrap high temperature parts such as a mufer
or exhaust pipe with oil absorbents.
•
Do not store oily cloths as they are vulnerable to
catching re.
•
Keep ammable materials away from open ames.
•
Do not ignite or crush a pressurized or sealed container.
TX1094261 —UN—28JUN13
•
Wire screens may be provided on openings on the
engine compartment covers to prevent ammable
materials such as dead leaves from entering. However,
ammable materials which have passed through
the wire screen may cause res. Check and clean
the machine every day and immediately remove
accumulated ammable materials.
Check Key Switch: If a re breaks out, failure to stop the
engine will escalate the re, hampering re ghting.
Always check key switch function before operating the
machine every day:
1. Start the engine and run it at slow idle.
2. Turn the key switch to the OFF position to conrm that
the engine stops.
•
If any abnormalities are found, be sure to repair them
before operating the machine.
Check Heat Shields: Damaged or missing heat shields
may lead to res.
•
Damaged or missing heat shields must be repaired or
replaced before operating the machine.
•
If hydraulic hoses are broken while the engine cover is
open, splattered oil on the high temperature parts such
as mufers may cause re. Always close the engine
cover while operating the machine.
1-2-6
112321
PN=34
Loading ...
Loading ...
Loading ...