Loading ...
Loading ...
Loading ...
Maintenance—Every 250 Hours
KR46761,00013AE -19-06DEC16-2/2
7. Underneath right side of machine, remove cap screws
(6) and access cover (7) to access drain valve cap
screw (8).
8. After oil is cool, loosen drain valve cap screw for
several seconds to drain water and sediment into
a container. Do not remove cap screw completely.
Dispose of waste properly.
9. Tighten drain valve cap screw.
10. Install hydraulic tank cap (1) to case assembly (4)
using aligning marks (5) and turning cap clockwise
to lock position.
11. Check hydraulic oil level. See Check Hydraulic Tank
Oil Level. (Section 3-4.)
12. Install access cover and cap screws.
1— Hydraulic Tank Cap
2— Hex Wrench
3— Hole
4— Case Assembly
5— Aligning Mark (2 used)
6— Cap Screw (4 used)
7— Access Cover
8— Drain Valve Cap Screw
TX1217818 —UN—20JUN16
Access Cover (view from under machine)
TX1224584 —UN—27SEP16
Drain Valve Cap Screw (view from under machine)
1
4
3
2
5
TX1217692 —UN—22JUN16
Hydraulic Tank Cap
3-8-3
112321
PN=230
Loading ...
Loading ...
Loading ...