Loading ...
Loading ...
Loading ...
Operation—Operator's Station
KR46761,0001151 -19-31MAY16-1/1
Attachment Combo Switch—If Equipped
NOTE: When the LED on the attachment combo switch
(1) is illuminated, the machine is in bucket and
thumb attachment mode. When the LED is off, the
machine is in log loader attachment mode.
The attachment combo switch (1) changes the button and
switch congurations on the control levers. This allows
the operator to alternate between bucket and thumb
attachment and log loader attachments.
NOTE: If pilot shutoff lever is in the unlocked (DOWN)
position while attempting to change to combo
mode, the LED will ash rapidly.
1. Place pilot shutoff lever in locked (UP) position.
2. Turn key switch to ON position. Do not start engine.
3. Press and hold the attachment combo switch for 2
seconds. The LED on the switch will go off.
4. Turn key switch to OFF position then to ON position to
initiate log loader attachment mode. Start engine.
5. Place pilot shutoff lever in unlocked (DOWN) position.
Operate attachment. See Attachment Combo Control
Levers—If Equipped. (Section 2-3.)
6. To return to bucket and thumb attachment mode, stop
engine. Turn key switch to ON position.
TX1213610 —UN—31MAR16
Attachment Combo Switch
1— Attachment Combo Switch
7. Press and hold the attachment combo switch for 2
seconds. The LED on the switch will illuminate.
8. Turn key switch to OFF position then to ON position to
initiate bucket and thumb attachment mode.
9. Start engine. Operate attachment. See Control
Levers. (Section 2-3.)
2-1-16
112321
PN=109
Loading ...
Loading ...
Loading ...