Loading ...
Loading ...
Loading ...
Maintenance—Every 10 Hours or Daily
Continued on next page KR46761,000138B -19-14DEC16-2/3
6. If necessary, add oil.
To add oil:
a. Insert 4 mm hex wrench (3) into hole (4) and turn
counterclockwise to release locking pin.
CAUTION: Avoid personal injury from
high-pressure uid. High-pressure release
of oil from pressurized system can cause
serious burns or penetrating injury. Relieve
pressure by slowly turning hydraulic tank cap
counterclockwise a few degrees.
To prevent possible burn injury from hot
hydraulic oil, wait for hydraulic oil to cool
before starting work.
b. Slowly turn hydraulic tank cap (2) counterclockwise
a few degrees to relieve pressure. Remove cap.
c. Add oil until it is between marks on sight glass. See
Hydraulic Oil. (Section 3-1.)
d. Install hydraulic tank cap to case assembly (5) using
aligning marks (6) and turning cap clockwise to lock
position.
7. Close service door.
2— Hydraulic Tank Cap
3— Hex Wrench
4— Hole
5— Case Assembly
6— Aligning Mark (2 used)
TS281 —UN—15APR13
Pressurized Fluids
TX1217689 —UN—16JUN16
Hydraulic Tank
2
5
4
3
6
TX1217691 —UN—20JUN16
Hydraulic Tank Cap
3-4-4
112321
PN=219
Loading ...
Loading ...
Loading ...