Loading ...
Loading ...
Loading ...
Maintenance—As Required
KR46761,000122A -19-16JUN16-2/2
KR46761,00012F8 -19-26JUL16-1/1
Adjust Track Sag
IMPORTANT: Prevent possible damage to track
components. DO NOT use the grease tting (1)
on the track adjusting cylinder for lubrication.
Use this tting ONLY for track adjustment.
1. To tighten track, connect a grease gun to grease tting
(1) (located through access hole [4] in track frame).
Add grease until sag is within recommended limits.
CAUTION: Prevent possible injury from
high-pressure grease. DO NOT remove
grease tting from nut (2).
2. To loosen, slowly turn nut (2) counterclockwise; grease
will escape through the bleed hole (3).
3. When amount of track sag is satisfactory, turn nut
clockwise to tighten.
Specication
Nut—Torque................................................................................147 N·m
108 lb·ft
1— Grease Fitting
2— Nut
3— Bleed Hole
4— Access Hole
T135187 —UN—06NOV00
Grease Fitting
T135188 —UN—06NOV00
Access Hole
Clean Rear Camera Lens—If Equipped
CAUTION: Avoid personal injury. DO NOT
climb on machine when inspecting or cleaning
rear camera lens (1).
IMPORTANT: Prevent possible damage to the camera
lens surface. The camera lens surface is a resin
product. Lightly wipe the surface with a wet,
clean cloth. Never use an organic solvent.
Inspect rear camera lens (1) for any accumulation of dirt,
mud, snow, ice, or debris.
Clean lens as necessary.
TX1220009 —UN—26JUL16
Rear Camera
1— Rear Camera Lens
3-3-8
112321
PN=210
Loading ...
Loading ...
Loading ...