Loading ...
Loading ...
Loading ...
Miscellaneous—Operational Checkout
Continued on next page KR46761,0001414 -19-01AUG18-20/50
Monitor and Gauge
Circuit Checks
TX1160754A —UN—15MAY14
Operating Screen
1— Power Mode Indicator
2— Hour Meter
3— Engine Coolant Temperature Gauge
4— Fuel Gauge
5— Alarm Indicator
11— Diesel Exhaust Fluid (DEF) Gauge
IMPORTANT: Engine damage could occur if the alarm indicator (5)
or engine oil pressure alarm indicator comes on after engine
starts. Turn off machine immediately.
NOTE: The aftertreatment device regeneration inhibit indicator will display on the
monitor when the key switch is in ON position. Once the engine is started,
the indicator will disappear unless aftertreatment device auto regeneration
has been disabled by the operator through the monitor.
Start engine.
LOOK: Do all alarm indicator displays remain off after engine starts?
LOOK: Does alarm indicator (5) remain off after engine starts? YES: Go to next check.
LOOK: Does engine coolant temperature gauge (3) display correct engine coolant
temperature?
NO: Engine oil pressure
alarm displayed.
Immediately stop engine
and check engine oil level.
See Check Engine Oil
Level. (Section 3-4.)
LOOK: Does fuel gauge (4) display correct fuel level? NO: Alternator alarm
indicator displayed. Check
alternator drive belt.
LOOK: Does diesel exhaust uid (DEF) gauge (11) display correct uid level? IF OK: See an authorized
Hitachi dealer.
4-2-15
112321
PN=295
Loading ...
Loading ...
Loading ...