Hantek DPO6004BC series oscilloscope

Hantek DPO6004B user manual - Page 78

For DPO6004BC.

PDF File Manual, 124 pages, Read Online | Download pdf file

DPO6004BC photo
Loading ...
Loading ...
Loading ...
DPO6000, MPO6000 Series Digital Fluorescent Oscilloscope Product Manual V1.3
75
play results include the range. The range of the range is determined by the vertical
scale and vertical offset of the channel. The range is the screen range. The upper spe-
cific value is the measurement result, the middle is the range, and the lower is the fre-
quency of the measurement.
Grid scale measurement
Grid scale measurement: This method can be used to quickly and intuitively estimate
the frequency and voltage amplitude of the waveform. It can be easily measured by the
division of the grid and the scale factor.
For example, a simple measurement can be made by calculating the relevant major
and minor scale divisions and multiplying by the scale factor. If it is calculated that there
are 6 major vertical scale divisions between the maximum and minimum values of the
waveform, and the known scaling factor is 50mV/division, the peak-to-peak voltage can
be calculated as follows:
6 divisions × 50mV/division = 300mV
Automatic measurement
Quick measurement after AUTO
After connecting the oscilloscope correctly, input a valid signal, press the Auto Scale
key to automatically set the waveform and open the following function menu:
Single cycle: Set the screen to display the signal of a single cycle automatically. At the
same time, a single cycle of "time parameter" and "voltage parameter" measurement is
performed on the current data source, and the measurement result is displayed at the
bottom of the screen.
Multi-cycle: Set the screen to automatically display signals for multiple cycles. At the
same time, multi-cycle “time parameter” and “voltage parameter” measurements are
performed on the current data source, and the measurement results are displayed at
the bottom of the screen.
Auto range: Select the scale automatically set by the system: "horizontal and vertical
scale", "horizontal scale" or "vertical scale".
Loading ...
Loading ...
Loading ...