Loading ...
Loading ...
Loading ...
DPO6000, MPO6000 Series Digital Fluorescent Oscilloscope Product Manual V1.3
53
[Baud rate] Select the baud rate.
DPO6000 / MPO6000 series machines provide users with common baud rates as fol-
lows:
110
300
600
1200
2400
4800
9600
14400
19200
38400
57600
115200
230400
380400
460400
Custom
If the user finds the required baud rate in the table above, you can select Custom and
set your own baud rate.
[Custom] Users set their own baud rate {only available by selecting Customize this
menu}.
[When] Set LIN trigger conditions:
Interval field: The edge is triggered when the LIN gap ends.
Sync field: LIN sync field data completion trigger.
ID field: LINID field data reception completion trigger.
Sync Code error: trigger when LIN sync field data is received but the sync field data is
not equal to 0x55.
Identifier: Triggered when the LINID field data is received and the ID data is equal to
the ID set by the user.
ID and data: LIN data is received normally. ID and data are equal to the data set by the
user.
[Identifier] The identifier data when LIN is triggered.
[Data 1] Data when LIN is triggered.
[Data 2] Data when LIN is triggered.
[Data 3] LIN trigger data.
[Data 4] LIN trigger data.
[Idle level] The level value (level / high level) at the LIN frame interval. The default set-
ting is high level.
[Mode] Select the acquisition mode (auto, normal) and press V0 to confirm.
[Holdoff] Set the holdoff time.
Loading ...
Loading ...
Loading ...