Hantek DPO6004BC series oscilloscope

Hantek DPO6004B user manual - Page 7

For DPO6004BC.

PDF File Manual, 124 pages, Read Online | Download pdf file

DPO6004BC photo
Loading ...
Loading ...
Loading ...
DPO6000, MPO6000 Series Digital Fluorescent Oscilloscope Product Manual V1.3
4
Refers to measurement at the source of the low-voltage equipment. Examples are elec-
tricity meters, measurements on major overcurrent protection devices, and measure-
ments on pulse control units.
Ventilation requirements
The oscilloscope is forcedly cooled by a fan. Ensure that the intake and exhaust areas
are free of obstructions and free-flowing air. To ensure adequate ventilation, when using
the oscilloscope in a workbench or rack, ensure that there is a gap of at least 10 cm on
its sides, above, and behind.
WARNING
Poor ventilation will increase the temperature of the instrument and cause
damage to the instrument. Good ventilation should be maintained during use. Reg-
ularly check the vents and fans.
Working environment
Temperature
During operation: 0 to +50
Non-operating: -40 to +70
Humidity
0 to +30: 95% relative humidity
+30 to +40: 75% relative humidity +40 to +50: 45% relative humidity
WARNING
To avoid the danger of short circuit or electric shock inside the instrument,
do not operate the instrument in a humid environment.
Altitude
When operating: below 3000 meters
Non-operating: below 15000 meters
Daily maintenance and cleaning
Daily maintenance
When storing or placing the oscilloscope, do not expose the LCD monitor to direct sun-
light for a long time.
Loading ...
Loading ...
Loading ...