Loading ...
Loading ...
Loading ...
DPO6000, MPO6000 Series Digital Fluorescent Oscilloscope Product Manual V1.3
58
12efabcd; data 1: 0 × a8; data 2: 0 × a9; data 3: 0 × aa; data 4: 0 × ab; Idle level: low;
mode: normal. Adjust the trigger level. The trigger result is displayed as follows:
CAN decoding explanation:
1. The decoded data is displayed in hexadecimal;
2. "Frame ID" and "Check Digit" display color is purple, "Data" display color is orange;
3. When “?” Or “Please adjust the time base” appears, you need to adjust the time
base to get the decoding result.
SPI trigger [optional]
SPI is the abbreviation of Serial Peripheral Interface. It is a synchronous serial interface
technology introduced by Motorola. It is a high-speed, full-duplex, synchronous com-
munication bus.
D7 D6 D5 D4 D3 D2 D1 D0
CLK
DAT
In SPI triggering, when the timeout condition is met, the oscilloscope will trigger when it
finds the specified data. When using SPI triggering, you need to specify the SCL clock
source and SDA data source. The timing diagram of the SPI bus is as follows:
Press the front panel Trig Menu button to open the trigger function menu.
[Type] Select SPI and press V0 to confirm.
Loading ...
Loading ...
Loading ...