Loading ...
Loading ...
Loading ...
Ethernet Port Aggregation
Ethernet aggregation lets you combine two Gigabit Ethernet ports to improve the
aggregated file transfer speed. Note that Ethernet port aggregation is also referred to
as link aggregation, teaming port, and port trunking. If a device supports Ethernet
aggregation, you can use the Ethernet aggregate ports 1 and 2 to cable the device that
supports Ethernet port aggregation to the router.
Note: To get the fastest performance with port aggregation, for wired connections use
Ethernet port 3 for the first computer, and use Ethernet port 4, 5, or 6 for the second
computer, which allows for speeds up to 2 Gbps with port aggregation. The maximum
speed between port 4, 5, and 6 is limited to 1 Gbps.
NETGEAR ReadyNAS equipment with two Ethernet ports such as the model
RN100/200/300/500/700 desktop series and the ReadyNAS RN2000/3000/4000
rack-mount series support Ethernet aggregation.
K
RESET
DC IN
USB
USB
LAN2
SATA
LAN1
UART
W X P
W X P
Figure 7. Ethernet port aggregation
Set Up Ethernet Port Aggregation
To set up Ethernet port aggregation:
1.
If you are connecting a switch, make sure that the switch supports 802.3ad LACP.
You must configure the switch before you connect the Ethernet cables to the router.
WARNING: To avoid causing broadcast looping, which can shut down your network,
do not connect an unmanaged switch to Ethernet aggregate port 1 and port 2 on
the router.
2. Use Ethernet cables to connect a device that supports Ethernet port aggregation,
such as a NAS or network switch, to Ethernet port 1 and port 2 on the router.
User Manual143Maintain the Router
Nighthawk AD7200 Gaming Router Model XR700
Loading ...
Loading ...
Loading ...