Loading ...
Loading ...
Loading ...
Connect with Bluetooth™
Pair with Bluetooth device
To connect with a new Bluetooth accessory or other device, you need to pair with it. You only
need to do this once for each device.
1. Set the device you want to pair (accessory, computer, other phone, etc.) to Bluetooth
discovery mode so that your phone can find it. See the device manufacturer’s instructions.
2. On your phone, go to Settings > Connected devices.
3.
Touch .
As the phone searches for available devices, you'll see .
4. Touch an available device to connect.
5. Do any of the following:
• If a pairing code appears on your phone and Bluetooth device, make sure the codes
match. (If they don't, touch Cancel, verify the name of the device you want to pair with,
and try again.)
• If your device shows a passkey (like 0000 or 1234), enter it on your phone. If you don't
see a place to enter it, swipe down from the top of your screen and touch the
Bluetooth notification.
• If your device doesn't show a passkey and you must enter one for the device to pair,
see the device manufacturers' instructions.
6. Touch Pair on your phone AND touch the pairing prompt on the other device. If you don't
confirm on both devices, pairing will fail.
7. Set sharing options if you'll want to share contacts, phone audio, media audio, or internet
access.
Tip: If you use a screen lock, you can define a paired Bluetooth device as a trusted device,
keeping your phone unlocked while connected to it. When you disconnect or move out of
range, your phone locks again. Go to Settings > Security & location > Smart Lock >
Trusted devices.
Can't pair? Try these troubleshooting steps.
Use paired device
Tip: Bluetooth connections can really drain your battery. Save power by turning Bluetooth off
when you're not connected to a device.
Connected devices
146
Loading ...
Loading ...
Loading ...