Loading ...
Loading ...
Loading ...
190
Appendix NAVI/AV
Slope is not displayed on the Vehi-
cle Dynamics screen. Inclination
does not move on the 3D Calibra-
tion Status screen.
The speed pulse lead is not con-
nected.
Connect the speed pulse lead.
No sound, no voice. “Guide Mute” has been set, or sound
volume is reduced to 0.
Adjust the volume of the guidance or
turn “Guide Mute” off.
Refer to “Setting the Volume for
Guidance and Phone” (➞ Page 95).
The person on the other end of the
phone call cannot hear the conversa-
tion due to an echo.
The voice from the person on the
other end of the phone call is output
from the speakers and then picked
up by the microphone again, creat-
ing an echo.
Use the following methods to reduce
the echo.
— Lower the volume on the receiver
— Have both speakers pause
slightly before speaking
The registered phone cannot be
deleted.
Normally, the registered phone can-
not be deleted.
• Overwrite the old registered phone
with a new phone.
• Clear [Phone Settings] by refer-
ring to “Returning the Navigation
System to the Default or Factory
Settings”.
When the screen is frozen...
Park your vehicle in a safe place, and cut off the engine. Turn the ignition key back to “Acc off”. Then
start the engine again, and turn the power to the navigation system back on. If this does not solve the
problem, press the RESET button on the navigation system.
Symptom Cause Action (See)
CD or DVD playback is not possible. The disc is inserted upside down. Insert the disc with the label upward.
The disc is dirty. Clean disc.
The disc is cracked or otherwise
damaged.
Insert a normal, round disc.
The files on the CD are an irregular
file format.
Check the file format.
The CD format cannot be played
back.
Replace disc.
The loaded disc is a type this system
cannot play.
Check what type the disc is. ( Also
see “Handling and Care of the Disc”
in the Hardware Manual and “Detail
Information for Playable Media” for
more cautions about handling each
type of media.)
No picture. The parking brake lead is not con-
nected or applied.
Connect a parking brake lead cor-
rectly, and apply the parking brake.
Parking brake interlock is activated. Park your vehicle in a safe place and
apply the parking brake.
➲ “Parking brake interlock” ➞
Page 20
The [AV Input] setting is incorrect. Please read the following page and
set the setting correctly.
➞ Page 156
The audio skips. The navigation system is not firmly
secured.
Secure the navigation system firmly.
Failure hard disk drive. Consult your Pioneer dealer.
“Rear display” picture disappears. The setting for [REAR SCREEN] is
incorrect.
Please read the following page and
set the rear screen setting correctly.
➞ Page 159
There was a problem with the “Rear
display” or a faulty wiring connec-
tion, for example.
Check the “Rear display” and its con-
nection.
Symptom Cause Action (See)
CRB2297A_U_English.book Page 190 Friday, January 5, 2007 2:51 PM
Loading ...
Loading ...
Loading ...