Loading ...
Loading ...
Loading ...
159
AV Chapter 16
Customizing the Audio Setting related
with Audio Visual
1 Touch [Rear SP] in the System Settings
menu.
2 Touch [Full] or [Sub.w] to switch the rear
output setting.
❒ When no subwoofer is connected to the
rear output, select Full. When a subwoofer
is connected to the rear speaker leads
directly, select Sub.w.
3 Touch [Preout] to switch the subwoofer
output or non fading output.
❒ When the [Rear SP] setting is Sub.w,
[Preout] is invalid.
❒ Even if you change this setting, there is no
output unless you turn [Non Fading] or
[Sub Woofer] in the Audio Settings
menu [On].
➲ “Using non fading output” ➞ Page 152
➲ “Using subwoofer output” ➞ Page 152
Switching the 5.1ch setting
When the navigation system is combined with
the multi-channel processor system (sold sepa-
rately), you can use the multi-channel sound.
Enter the following setting when combining the
multi-channel processor system.
• DO NOT enter this setting before you con-
nect the multi-channel processor system.
(If this setting is entered, the RCA (“SUB-
WOOFER OUTPUT or NON-FADING OUT-
PUT”) will output maximum volume for
the multi-channel processor system.) Pio-
neer is not responsible for any damage to
the speaker equipment caused by ignoring
this warning.
❒ This setting is possible only when the optical
cable connection box (supplied with the Multi-
channel processor) is connected to the navi-
gation system.
1 Touch the source icon and then touch
[OFF] to turn source off.
When the source icon is not displayed, you
can display it by touching the screen.
2 Touch [5.1Ch Setup] in the System Set-
tings menu.
If you touch [5.1Ch Setup], it will be turned
[On]. If you touch [5.1Ch Setup] again to turn
[Off] the setting, [5.1Ch Setup] will disap-
pear. If you want to turn it [On] again, you
have to repeat the procedure from the Step1.
Other Functions
Selecting the video for “Rear
display”
You can choose either to show the same image
as the front screen or to show the selected
source on the “Rear display”.
1 Press the AV button to switch Audio oper-
ation screen.
2 Touch the source icon and then touch
[REAR SCREEN].
Each touch of [REAR SCREEN] changes the
settings as follows:
• MIRROR — The video on the front screen
of the navigation unit is output to the “Rear
display”
• DVD — The video and sound of the DVDs
are output to the “Rear display”
• AV — The video and sound of the AV
INPUT are output to the “Rear display”
❒ When MIRROR is selected, the following
restrictions are applied to “Rear display”.
— When the TV tuner is connected with AV-
BUS, its “Video image” cannot be output.
(Connect the TV tuner’s rear output to “Rear
display” directly.)
— When selecting [Rear View] in the map
display, nothing is displayed.
— All sounds cannot be output for “Rear dis-
play”.
— There is no picture on “Rear display” while
[Picture Adjust] for [Back-Camera] is car-
ried out.
CRB2297A_U_English.book Page 159 Friday, January 5, 2007 2:51 PM
Loading ...
Loading ...
Loading ...