Loading ...
Loading ...
Loading ...
9. Using Menu Functions
212
Applicable modes:
Type of optical measurement to measure brightness can be changed.
Applicable modes:
You can adjust the brightness of bright and dark portions on an image while checking the
brightness on the screen.
1 Rotate the front/rear dial to adjust the brightness of
bright/dark portions.
A Bright portion
B Dark portion
• The rear dial is for adjusting dark areas, and the front
dial is for adjusting bright areas.
• To register a preferred setting, press 3, and select the
destination where the custom setting will be registered to
([Custom1] ( )/[Custom2] ( )/[Custom3] ( )).
• Adjustments can also be made by dragging the graph.
2 Press [MENU/SET].
[Metering Mode]
> [Rec] > [Metering Mode]
[]
(Multiple)
This is the method in which the camera measures the most suitable
exposure by judging the allocation of brightness on the whole screen
automatically.
Usually, we recommend using this method.
[]
(Center weighted)
This is the method used to focus on the subject on the center of the
screen and measure the whole screen evenly.
[]
(Spot)
This is the method to measure the subject in the spot
metering target A.
• If you set the spot metering target on the edge of the
screen, the metering may be affected by the brightness
around the location.
[Highlight Shadow]
> [Rec] > [Highlight Shadow]
(Standard) A state with no adjustments is set.
(Raise the contrast) Bright areas are brightened, and dark areas are darkened.
(Lower the contrast) Bright areas are darkened, and dark areas are brightened.
(Brighten dark areas) Dark areas are brightened.
// (Custom) Registered custom settings can be applied.
MENU
MENU
ヒ
ヤ
ビ
ヤ
ピ
ヤ
ヒ
ヤ
ビ
ヤ
ピ
ヤ
Loading ...
Loading ...
Loading ...