Loading ...
Loading ...
Loading ...
(81,1)
北米Model "A2630BE-A" EDITED: 2022/ 12/ 23
Three tether anchorages, i.e., ones for the
right, center and left positions, are already
installed on the back side of the rear
seatback.
! To hook the top tether
s01ag0902
CAUTION
. Always raise the head restraint
when mounting a child restraint
system with a top tether. Failure
to do so may prevent the top
tether from being fastened
tightly.
. If the head restraint is removed,
store the head restraint in the
trunk (Legacy) or the cargo area
(Outback/Subaru Outback
Wilderness).
. Do not place the head restraint in
the passenger compartment to
prevent it from being thrown
around in the passenger com-
partment in a sudden stop or a
sharp turn.
! Legacy
s01ag090201
1 When installing in the window-side seat-
ing position
2 When installing in the rear center seating
position
1. Raise the head restraint at the seating
position where the child restraint sys-
tem is to be installed with the seatbelt
or lower anchorages.
2. Open the cover flaps to use the
anchorages.
3. Pass the top tether between the head
restraint and seatback.
4. Fasten the top tether hook of the child
restraint system to the appropriate
– CONTINUED –
Child Restraint Systems
79
1
Seat, Seatbelt and SRS Airbags
Loading ...
Loading ...
Loading ...