Loading ...
Loading ...
Loading ...
(141,1)
北米Model "A2630BE-A" EDITED: 2022/ 12/ 23
setting can also be changed by a
SUBARU dealer. Consult your SUBARU
dealer for details.
& Locking the Doors
s02ae01
Press the “ ” button to lock all doors, rear
gate (Outback/Subaru Outback
Wilderness) and fuel filler lid. An electronic
chirp will sound once and the hazard
warning flashers will flash once.
If any of the doors (or the rear gate) are not
fully closed, the following will occur to alert
you that the doors (or the rear gate) are not
properly closed.
. An electronic chirp sounds five times.
. The hazard warning flashers flash five
times.
When you close the door, it will automati-
cally lock and then the following will occur.
. An electronic chirp sounds once.
. The hazard warning flashers flash
once.
& Unlocking the Doors
s02ae02
Press the “ ” button to unlock the driver’s
door and fuel filler lid. An electronic chirp
will sound twice and the hazard warning
flashers will flash twice. To unlock all doors
and the rear gate, briefly press the “
”
button again within 5 seconds.
NOTE
If the interval between the first and
second presses of the “
” button (for
unlocking of all of the doors and the
rear gate) is extremely short, the sys-
tem may not respond.
& Opening the Trunk Lid
(Legacy)
s02ae13
Press and hold the “ ” button to open the
trunk lid. An electronic chirp will sound
twice and the hazard warning flashers will
flash twice.
This operation setting can be changed by a
SUBARU dealer. Consult your SUBARU
dealer for details.
& Unlocking the Rear Gate
(Outback/Subaru Outback
Wilderness)
s02ae03
Press the “ ” button to unlock the rear
gate. An electronic chirp will sound twice
and the hazard warning flashers will flash
twice.
This operation setting can be changed by a
SUBARU dealer. Consult your SUBARU
dealer for details.
& Setting Audible Signal Op-
eration
s02ae07
Using an electronic chirp, the system will
give you an audible signal when the doors
lock and unlock.
Models with “keyless access with
push-button start system”:
If desired, you can turn the audible signal
off by operating the center information
display. For details, refer to “Car settings”
�P230 (11.6-inch display models) or “Car
Settings icon” �P250 (dual 7.0-inch dis-
play models). Furthermore, the volume
setting of the audible signal can also be
changed by a SUBARU dealer. Consult
your SUBARU dealer for details.
Models without “keyless access with
push-button start system”:
Perform the following steps to deactivate
the audible signal. Take the same steps to
restore the function.
– CONTINUED –
Remote Keyless Entry System
139
2
Keys and Doors
Loading ...
Loading ...
Loading ...