Loading ...
Loading ...
Loading ...
(398,1)
北米Model "A2630BE-A" EDITED: 2022/ 12/ 23
. When the electronic parking brake
has not been used for a long period
of time, the electronic parking brake
may operate automatically after the
ignition switch is turned to the
“LOCK”/“OFF” position. This oc-
curs due to checking the proper
operation of the electronic parking
brake and does not indicate a mal-
function.
. If the electronic parking brake
switch is malfunctioning and the
electronic parking brake cannot be
released, refer to the instructions
described in “Automatic release
function by accelerator pedal”
�P396.
. After activating the electronic park-
ing brake, you may hear a short
sound several minutes after the
electronic parking brake indicator
light and the indicator light on the
electronic parking brake switch illu-
minate as the system confirms prop-
er engagement. This sound is differ-
ent from the apply and release
sound.
This can occur:
– If the brakes are extremely hot.
– If the car is parked on a steep
incline.
– If the electronic parking brake is
applied after the ignition switch is
turned OFF.
This is a normal operating sound
under any of these conditions.
. The Auto Start Stop system is deac-
tivated while the electronic parking
brake is applied.
. If you operate the electronic parking
brake switch while the Auto Start
Stop system is activated, the Auto
Start Stop system will be deacti-
vated. The electronic parking brake
will activate after the engine is
restarted. After the electronic park-
ing brake indicator light is illumi-
nated, release your foot from the
brake pedal.
. When starting the engine or restart-
ing the engine using the Auto Start
Stop system, if you operate the
electronic parking brake switch, the
electronic parking brake indicator
light may flash temporarily. How-
ever, this is not a malfunction if the
light turns off after the electronic
parking brake is deactivated.
! Automatic release function by ac-
celerator pedal
s07ap0301
The electronic parking brake system has
an automatic release function. The parking
brake will be automatically released by
depressing the accelerator pedal. How-
ever, the automatic release function does
not operate under the following conditions.
. Any door (other than the trunk lid or rear
gate) is open.
. The driver’s seatbelt is not fastened.
If the parking brake is automatically
released, the electronic parking brake
indicator light and the indicator light on
the parking brake switch turn off.
NOTE
Even if you have applied the parking
brake, the parking brake will be auto-
matically released when the accelera-
tor pedal is depressed.
! Auto Vehicle Hold function
s07ap0305
The Auto Vehicle Hold function will auto-
matically keep the vehicle stopped even
after releasing the brake pedal when the
vehicle is at a complete stop, such as at
traffic signals.
WARNING
. Do not use the Auto Vehicle Hold
function on a steep hill or slip-
pery road. The vehicle may move
even when using the Auto Vehicle
Hold function, causing serious
injury or accidents.
Parking Your Vehicle
396
Loading ...
Loading ...
Loading ...