Loading ...
Loading ...
Loading ...
(78,1)
北米Model "A2630BE-A" EDITED: 2022/ 12/ 23
Each lower anchorage is located be-
hind the cover of seatback bottom.
CAUTION
When you install a child restraint
system, follow the manufacturer’s
instructions supplied with it. After
installing the child restraint system,
check to ensure that it is held
securely in position. If it is not held
tight and secure, the danger of your
child suffering personal injury in the
event of an accident may be in-
creased.
Peel off the anchorage cover completely
from the selected side of the rear seatback
to expose the anchorages (bars) to be
used for installation of the child restraint
system.
If it is hard to install the child restraint
system because the anchorage cover
returns to the original position, press the
anchorage cover to the seat cushion until it
is flat.
3. If the child restraint system makes
contact with the head restraint of the
rear seating position where the child
restraint system is to be installed, raise
the head restraint to the extended
position. If the child restraint system
still makes contact, remove the head
restraint. For details, refer to “Head
Restraint Adjustment” �P45.
CAUTION
Store the head restraint that has
been removed in the trunk (Legacy)
or the cargo area (Outback/Subaru
Outback Wilderness). Do not place
the head restraint in the passenger
compartment to prevent it from
being thrown around in the passen-
ger compartment in a sudden stop
or a sharp turn.
4. For Outback/Subaru Outback
Wilderness models, adjust the seat-
back to the upright position.
5. While following the instructions sup-
plied by the child restraint system
manufacturer, connect the lower hooks
onto the lower anchorages located at
Child Restraint Systems
76
Loading ...
Loading ...
Loading ...