Loading ...
Loading ...
Loading ...
(409,1)
北米Model "A2630BE-A" EDITED: 2022/ 12/ 23
. Under an artificial light such as a
fluorescent lamp, sodium-vapor
lamp or mercury lamp, the lighted
portion may look like it is flickering
(flicker phenomenon).
. While the display has cooled down,
the image may leave traces or be-
come darker than usual, causing a
difficulty in viewing the screen. Al-
ways check the traffic around the
vehicle directly with your eyes while
driving the vehicle.
. The following incidents should not
be deemed a malfunction.
– The camera lens may become
foggy when the humidity is high
on a rainy day.
– The light from a vehicle or build-
ing located ahead may be re-
flected towards the camera im-
age while driving at night.
– In a dark place or while driving at
night, the camera image may be
adjusted to make noises less
visible. Therefore, the image
may look like a monochromatic
image or the image colors may
differ from the actual colors. The
camera image may be deterio-
rated in regard to sharpness at
the center and four corners of the
screen. This is not a malfunction.
& Guiding Line
s07bq04
1 Guiding lines
2 Warning message
The guiding lines that indicates the width
and the front end of your vehicle are
displayed on the display.
& Handling of Camera
s07bq05
CAUTION
Observe the following instructions.
Otherwise, the system may malfunc-
tion.
. Do not apply any strong impact to
the camera such as banging it or
hitting it with an object. The
mounting angle may change.
. The camera unit is a waterproof
structure. Do not attempt to re-
move, disassemble or modify the
unit.
. Do not rub strongly or polish the
camera lens with a hard brush or
abrasive compounds. The lens
may be scratched resulting in an
adverse effect to the camera
image.
. The camera lens is made of glass
or plastic. Do not allow any
organic solvent, body wax, oil
film remover or glass coating
agent to become attached on the
lens surface. If any becomes
attached, remove it immediately.
. Do not expose the camera lens to
any sudden temperature change,
for example, spraying hot water
on it in cold weather.
. Do not apply the water jet of a
high pressure washer to the cam-
era or the surrounding area when
cleaning the vehicle. The impact
by the strong water pressure may
cause the camera to come off.
Also, water may enter inside the
camera and cause a malfunction.
. If the camera is exposed to any
impact, it may lead to malfunction
– CONTINUED –
Front View Monitor
407
7
Starting and Operating
Loading ...
Loading ...
Loading ...