Loading ...
Loading ...
Loading ...
(142,1)
北米Model "A2630BE-A" EDITED: 2022/ 12/ 23
Steps Operation Time
1 Sit in the driver’s seat. —
2
Close all doors and the
rear gate.
—
3
(1)
Press and hold “
” on
the power locking
switch.
Within
10 sec.
(2)
Insert the key into the
ignition switch and pull it
out at least 6 times.
4
Open and close the dri-
ver’s door.
Within
10 sec.
The hazard warning flashers flash 3 times
to indicate completion of the setting.
Your SUBARU dealer can perform the
above procedure for you.
& Selecting Hazard Warning
Flasher Operation
s02ae26
Using the hazard warning flasher, the
system will give you a visible signal when
the doors are locked or unlocked. If
desired, you can turn the hazard warning
flashers off by operating the center infor-
mation display. For details, refer to “Car
settings” �P230 (11.6-inch display mod-
els) or “Car Settings icon” �P250 (dual
7.0-inch display models). The setting can
also be changed by a SUBARU dealer.
Consult your SUBARU dealer for details.
& Vehicle Finder Function
s02ae05
Use this function to find your vehicle
parked among many vehicles in a large
parking lot. Provided you are within 30 feet
(10 meters) of the vehicle, pressing the “
”
button three times in a 5-second period will
cause your vehicle’s horn to sound once
and its hazard warning flashers to flash
three times.
NOTE
If the interval between presses is too
short when you press the “
” button
three times, the system may not re-
spond to the signals from the remote
transmitter.
& Sounding a Panic Alarm
s02ae06
To activate the alarm, press the “PANIC”
button once.
The horn will sound and the hazard
warning flashers will flash.
To deactivate the panic alarm, press any
button on the remote transmitter. If a
button on the remote transmitter is not
pressed, the alarm will be deactivated after
approximately 30 seconds.
& Replacing the Battery
s02ae08
Refer to “Replacing Battery” �P561.
& Replacing Lost Transmitters
s02ae09
If you lose a transmitter or want to
purchase additional transmitters (up to
four can be programmed), you should re-
program all of your transmitters for security
reasons. For details, contact your
SUBARU dealer and have the transmitters
programmed into the remote keyless entry
system.
Remote Keyless Entry System
140
Loading ...
Loading ...
Loading ...