Loading ...
Loading ...
Loading ...
(265,1)
北米Model "A2630BE-A" EDITED: 2022/ 12/ 23
. The push-button ignition switch is
turned to the “OFF” status (models with
“keyless access with push-button start
system”).
. The key is pulled out from the ignition
switch (models without “keyless access
with push-button start system”).
The low beam headlights will turn off under
any of the following conditions.
. 3 minutes have passed since the low
beam headlights were illuminated by
the welcome lighting function.
. 30 seconds have passed since the door
is opened and closed.*
1
. The light control switch is turned to a
position other than “AUTO”.
. The locking procedure is performed
twice. When performing the unlocking
procedure after performing the locking
procedure, perform the locking proce-
dure twice again.
*1: The setting for the period of time in which the
low beam headlights remain on by the
welcome lighting function can be changed
by a SUBARU dealer. Contact your
SUBARU dealer for details. Also, you can
change the setting by operating the center
information display. For details, refer to “Car
settings” �P230 (11.6-inch display models)
or “Car Settings icon” �P250 (dual 7.0-inch
display models).
! Sensor for the auto on/off head-
lights
s03ah0101
The sensor is on the instrument panel as
shown in the illustration.
CAUTION
If any object is placed on or near the
sensor, the sensor may not detect
the level of the ambient light cor-
rectly and the auto on/off headlights
may not operate properly.
& High/Low Beam Change
(Dimmer)
s03ah02
1 High beam
2 Low beam
While the light control switch is in the “ ”
or “
” position in a dark place, the
headlights will turn on.
When the headlights are on high beam, the
high beam indicator light “
” on the
combination meter is also on.
NOTE
While the light control switch is in the
“
” position and the lever is the high
beam position, the high beam assist
function will be on standby.
– CONTINUED –
Light Control Switch
263
3
Instruments and Controls
Loading ...
Loading ...
Loading ...