Loading ...
Loading ...
Loading ...
(437,1)
北米Model "A2630BE-A" EDITED: 2022/ 12/ 23
. The Driver Monitoring System may
not operate correctly at the following
times when the driver is wearing
glasses or sunglasses.
– The sunglasses do not allow the
easy passage of infrared light.
– The surrounding scenery is re-
flected strongly in the lenses of
the glasses or sunglasses.
– The eyes are hidden by the frame
of the glasses and the user
recognition camera cannot de-
tect the eyes.
– The light from an infrared light
source (LED) is reflected in the
lenses of the glasses or sun-
glasses.
– The driver is wearing an eye-
patch.
– The driver is wearing a hat set
deeply over the eyes.
. Depending on the type of mask,
correct detection of inattentive/
drowsy driving may not be possible.
. Correct user recognition is not pos-
sible if the eyes, nose, or mouth is
covered with a mask, muffler, sun-
glasses, or other item.
. The Driver Monitoring System may
not operate correctly when the eye-
brows, eyes, nose, or mouth is
hidden due to item that is between
the face and the system.
. If a thick cover is attached to the
steering wheel, then depending on
the position set for the tilt/telescopic
steering wheel, the cover may block
the system’s view of the face, and
the system and the Driver Monitor-
ing System may not operate cor-
rectly.
. Do not attach any stickers to the
user recognition camera or the infra-
red light source (LED). If the user
recognition camera or infrared light
source (LED) is covered by an
obstruction, it will not be possible
to correctly monitor the driver.
. If an accessory is hung from the
inside mirror, correct detection may
not be possible.
. Do not touch the user recognition
camera or the infrared light source
(LED) directly with your fingers. If
there is dirt or a fingerprint on these
parts, it will not be possible to
correctly monitor the driver. If there
is dirt or a fingerprint on these parts,
either wipe them with a soft dry
cloth, or wipe gently with a damp
cloth after first firmly wringing the
water out.
. If the surface of the user recognition
camera or the infrared light source
(LED) becomes scratched, correct
detection may not be possible. Be
careful that hard objects do not
contact these parts.
. If there is condensation on the user
recognition camera or the infrared
light source (LED), correct detection
may not be possible. If there is
condensation on these parts, wipe
it away with a soft dry cloth.
. When registering a user for user
recognition, avoid closing your eyes
as much as possible.
. If the user recognition success rate
is low, it is possible that the user is
not correctly registered. Delete the
registered data and perform regis-
tration again.
. If a user frequently drives both with
glasses and contact lenses, it is
recommended that registration be
performed both when wearing
glasses and when wearing contact
lenses.
. User recognition starts immediately
after entering the vehicle, however if
the user looks downward or at the
driver side mirror for a long time, the
user may not be recognized.
. When one person among twins or
another pair of persons with similar
facial features is registered, the
other person may be incorrectly
recognized as the registered user
– CONTINUED –
Driver Monitoring System
435
7
Starting and Operating
Loading ...
Loading ...
Loading ...