Loading ...
Loading ...
Loading ...
(397,1)
北米Model "A2630BE-A" EDITED: 2022/ 12/ 23
shift lock. Refer to “Shift Lock
Function” �P377.
– Use tire stops under the tires
to prevent the vehicle from
moving.
. Never drive with the parking
brake applied. Doing so will
cause unnecessary brake pad
wear. Before driving off, always
make sure that the parking brake
has been released and the brake
system warning light has turned
off.
. The braking power of the electro-
nic parking brake may not be
sufficient when strong braking
power is needed (e.g., when park-
ing on a steep slope while towing
a trailer (Outback/Subaru
Outback Wilderness)).
Your vehicle is equipped with an electronic
parking brake. You can apply/release the
parking brake by operating the parking
brake switch.
To apply: Depress the brake pedal and
pull up the parking brake switch.
To release: Press the parking brake
switch firmly while the ignition switch is in
the “ON” position and the brake pedal is
depressed.
Electronic parking brake indicator light
When the parking brake is applied while
the ignition switch is in the “ON” position,
the following indicator lights illuminate.
. The indicator light on the parking brake
switch
. The electronic parking brake indicator
light on the combination meter (for
details, refer to “Electronic Parking
Brake Indicator Light” �P193.)
NOTE
. The parking brake will not be re-
leased under the following condi-
tions even if the parking brake
switch is pressed.
– The ignition switch is in the
“ACC” or “LOCK”/“OFF” posi-
tion.
– The brake pedal is not depressed.
. The electronic parking brake system
uses motors to apply the parking
brake. Therefore, operating sounds
from the motors will be heard when
applying or releasing the parking
brake. Make sure that the motor
sounds are heard when applying or
releasing the parking brake.
. When the electronic parking brake
system has a malfunction or the
electronic parking brake operation
is prohibited temporarily, if the park-
ing brake switch is operated, a chirp
sound is heard and the electronic
parking brake indicator light flashes.
. When you cannot release the park-
ing brake due to, for example, a
system malfunction, contact your
SUBARU dealer and have your
SUBARU dealer release the parking
brake.
. If the operation of the electronic
parking brake switch is stopped
midway or performed extremely
slowly, the system may detect an
error and turn on the brake system
warning light. However, this does
not indicate a malfunction if the
warning light turns off after operat-
ing the switch.
– CONTINUED –
Parking Your Vehicle
395
7
Starting and Operating
Loading ...
Loading ...
Loading ...