Loading ...
Loading ...
Loading ...
(413,1)
北米Model "A2630BE-A" EDITED: 2022/ 12/ 23
projection on its upper part such as a sign
pole behind the vehicle, the projection
cannot be seen on the screen.
& Help Lines
s07br03
The help lines are a guide to help you
realize the actual distance from the screen
image.
NOTE
If you shift to the “R” range within
several seconds after turning on the
ignition switch, the warning message
may not be displayed. Wait for several
seconds after turning on the ignition
switch before shifting to the “R” range.
Then, the warning message will be
displayed.
Help lines
1 Vehicle width line (oblique vertical line)
2 Approx. 10 ft (3 m) from the bumper
(green horizontal line)
3 Approx. 6 ft (2 m) from the bumper (green
horizontal line)
4 Approx. 3 ft (1 m) from the bumper
(yellow horizontal line)
5 Approx. 1.5 ft (0.5 m) from the bumper
(red horizontal line)
6 Vehicle centerline
7 Dynamic guidelines
When the select lever is set to “R”, the
monitor screen displays the help lines
together with the rear view image.
CAUTION
. When moving backward, always
check the back with your eyes
without relying on the help lines.
Otherwise, it may cause an acci-
dent or injury.
. The actual position may be differ-
ent from the indication of the help
lines.
. Differences may occur due to the
number of passengers or the
loaded cargo.
. When the vehicle is on a slope or
inclined against the road, the
indication is different from the
actual position.
NOTE
When “Steering Angle Lines” is off, the
dynamic guidelines will be disappear
on the center information display. To
turn the dynamic guidelines on and off,
refer to “General settings” �P225
(11.6-inch display models) or “General
settings” �P243 (dual 7.0-inch display
models).
! Difference between screen image
and actual road
s07br0301
The distance markers show the distance
for a level road when the vehicle is not
loaded. It may be different from the actual
distance depending on the loading condi-
tions or road conditions.
– CONTINUED –
Rear View Camera
411
7
Starting and Operating
Loading ...
Loading ...
Loading ...