Loading ...
Loading ...
Loading ...
(72,1)
北米Model "A2630BE-A" EDITED: 2022/ 12/ 23
9. Pull at the shoulder portion of the belt
to confirm that it cannot be pulled out
(ALR properly functioning).
Legacy
Outback/Subaru Outback Wilderness
10. Latch the top tether hook onto the
tether anchorage that is located behind
the rear seat and tighten the top tether
firmly. For additional instructions, refer
to “Top Tether Anchorages” �P77.
11. To remove the child restraint system,
press the release button on the seat-
belt buckle and allow the belt to retract
completely. The belt will return to the
ELR mode.
Remember that the head restraint is not
intended to be used at the lowest position
(retracted position). Therefore, when the
rear center seat is occupied (including
when a child restraint system is installed)
next time, be sure to raise the head
restraint to the extended position.
NOTE
When the child restraint system is no
longer in use, remove it and restore the
ELR function of the retractor. That
function is restored by allowing the
seatbelt to retract fully.
& Installing a Booster Seat or
Booster Cushion
s01ag05
Booster seat
Child Restraint Systems
70
Loading ...
Loading ...
Loading ...