Loading ...
Loading ...
Loading ...
(268,1)
北米Model "A2630BE-A" EDITED: 2022/ 12/ 23
! Tips for the high beam assist sys-
tem
s03ah0703
. The high beam assist function recog-
nizes the condition surrounding the
vehicle based on the brightness of
illumination ahead of your vehicle, etc.
Therefore, the headlight mode may
switch in some situations that do not
match to the driver’s sense.
. A bicycle or cargo cycle may not be
detected.
. Under the following situations, the
brightness of ambient illumination may
not be detected correctly and the high
beam assist function may not work
properly. As a result, the glare of the
high beam may disturb the oncoming
vehicle or vehicle ahead. Also, the low
beam mode may continue although
there are no oncoming vehicles and
vehicles ahead. In the such cases,
change the headlight mode manually.
– In bad weather (fog, snow, sand
storm, heavy rain, etc.).
– When the windshield glass is dirty or
fogged.
– When the windshield is cracked or
damaged.
– If there are lights similar to the
headlights or the tail lights in the
surrounding area.
– When an oncoming vehicle or ve-
hicle ahead is driven without its
headlights and tail lights on.
– If the headlights of an oncoming
vehicle or the tail lights of a vehicle
ahead are dirty or discolored, or if
the light beams are not aimed
correctly.
– When a rapid change of brightness
continues while driving.
– When driving on a road with many
ups and downs or uneven surfaces.
– When driving on a road with many
curves.
– When there are some objects that
reflect light strongly, such as a road
sign or a mirror in vehicle ahead.
– When the rear part of the vehicle
ahead, such as a container, reflects
light strongly.
– When the headlights of your vehicle
are damaged or dirty.
– When your vehicle is tilted, such as
in case the vehicle has a flat tire or is
being towed.
– When the stereo camera is de-
formed or the stereo camera lenses
are dirty.
– Immediately after the engine has
started.
. In the following conditions, the head-
light mode will not be automatically
changed from the high beam to the low
beam.
– When your vehicle passes an on-
coming vehicle suddenly in a blind
curve.
– When another vehicle passes in
front of your vehicle.
– When an oncoming vehicle or ve-
hicle ahead comes in and out of
view because of continuous curves,
median strips, roadside trees, etc.
. If the stereo camera detects the light of
the front fog lights of an oncoming
vehicle, the headlight mode may
change from the high beam to the low
beam automatically.
. The headlight mode may change from
the high beam to the low beam, or the
low beam mode may continue, when
affected by a street light, traffic signal,
illumination of an advertisement board,
or a reflective object such as a road
sign and signboard.
. The timing of the change of headlight
mode may differ due to the following
factors.
– Color or brightness of the headlights
of an oncoming vehicle or the tail
lights of a vehicle ahead.
– The headlights of the oncoming
vehicle or the tail lights of the vehicle
ahead are covered with mud, snow,
Light Control Switch
266
Loading ...
Loading ...
Loading ...