Loading ...
Loading ...
Loading ...
(419,1)
北米Model "A2630BE-A" EDITED: 2022/ 12/ 23
! BSD/RCTA approach indicator light
s07bm0301
BSD/RCTA approach indicator light
It is mounted on each side of the outside
mirrors.
The indicator light will illuminate when a
vehicle approaching from behind is de-
tected.
The indicator light will flash to warn the
driver of dangers under the following
conditions.
. While the indicator light is illuminating, if
the turn signal lever is operated toward
the side in which this light turned on
. When reversing the vehicle while the
system detects a vehicle approaching
from either side
! BSD/RCTA approach indicator
light dimming function
s07bm030101
When the headlights are turned on, the
brightness of the BSD/RCTA approach
indicator light will be reduced.
NOTE
. You may have difficulty seeing the
BSD/RCTA approach indicator light
under the following conditions.
– When sunlight shines directly on
it
– When the headlight beams from a
vehicle traveling behind shines
directly on it
. While the illumination brightness
control dial is in the fully upward
position, even if the headlights are
turned on, the brightness of the
BSD/RCTA approach indicator light
will not be reduced. For details about
the illumination brightness control
dial, refer to “Illumination Bright-
ness Control” �P181.
! BSD/RCTA approach warning buz-
zer (only when reversing)
s07bm0302
A warning buzzer sounds along with
flashing of the BSD/RCTA approach in-
dicator light to warn the driver of dangers.
The setting of the warning buzzer volume
can be changed by operating the center
information display. For details, refer to
“Car settings” �P230 (11.6-inch display
models).
! Safety tips regarding the BSD/RCTA
approach indicator light/warning
buzzer
s07bm0303
. In the following cases, operation of the
BSD/RCTA approach indicator light
and the warning buzzer may be de-
layed or the system may fail to issue
these warnings.
– When a vehicle moves to the neigh-
boring lane from a lane next to the
neighboring lane
– When driving on a steep incline or
on repeated sharp uphill and down-
hill grades
– When going beyond a pass
– When both your vehicle and a
vehicle driving on a neighboring
lane are driving on the far side of
each lane.
– When several narrowly-spaced ve-
hicles are approaching in a row
– In low radius bends (tight bends or
when making turns at an intersec-
tion)
– When there is a difference in height
between your lane and the neigh-
boring lane
– CONTINUED –
BSD/RCTA
417
7
Starting and Operating
Loading ...
Loading ...
Loading ...