Loading ...
Loading ...
Loading ...
(36,1)
北米Model "A2630BE-A" EDITED: 2022/ 12/ 23
! Power driver’s seat with synchro-
nized outside mirrors memory
function (if equipped)
s01aa0207
WARNING
. To avoid loss of vehicle control or
personal injury, never perform
the following operations while
driving.
– Adjusting the seat
– Selecting a registered seat
position
. Before adjusting the seat or se-
lecting a registered seat position,
make sure that cargo or the
hands and feet of rear seat pas-
sengers are clear of the adjusting
mechanism.
. The memory adjustment of the
seat position is finished. Be sure
to confirm that the select lever is
in the “P” position, and the park-
ing brake is applied, when adjust-
ing the seat position. Do not drive
until the utilizing of the seat
position is complete.
. When any unusual conditions or
malfunctions occur during the
memory adjustment of the seat
position, stop the memory ad-
justment of the seat position by
performing any of the following
procedures.
– Operate any of the power seat
switches.
– Press the “SET” button.
– Press button “1” or “2”.
– Operate the outside mirror
control switch.
Register the seat position with button “1” or
“2” or each of the key fobs.
The following memory positions can be
registered.
. Forward/backward position of the seat
. Angle of the seatback
. Angle of the seat cushion
. Height of the seat
. Angle of the outside mirrors
. Angle of the outside mirror angle on the
passenger’s side when the reverse tilt-
down operates.
NOTE
The seat position can also be retrieved
with the Driver Monitoring System user
information. To do so, perform user
registration in the Driver Monitoring
System settings. Refer to “Driver Mon-
itoring System” �P237.
! Registration of memory position
with button “1” or “2”
s01aa020701
1. Adjust the seat and outside mirror
positions under the following condi-
tions.
. The parking brake is applied.
. The ignition switch is in the “ON”
position.
. The select lever is in the “P” position.
2. Register the adjusted positions by
either of the following procedures.
. Press the “SET” button, then press
either “1” or “2” until a chirp sounds
within 5 seconds.
. While pressing and holding the
“SET” button, press either “1” or “2”
until a chirp sounds within 5 sec-
onds.
Front Seats
34
Loading ...
Loading ...
Loading ...