Loading ...
Loading ...
Loading ...
(501,1)
北米Model "A2630BE-A" EDITED: 2022/ 12/ 23
Outback/Subaru Outback Wilderness
2. Cover the tip of a flat-head screwdriver
with vinyl tape or cloth so that it will not
scratch the bumper. Pry off the cover
on the rear bumper using a screwdri-
ver, and you will find a threaded hole
for attaching the towing hook.
3. Screw the towing hook into the
threaded hole until its thread can no
longer be seen.
4. Tighten the towing hook securely using
the jack handle and wheel nut wrench.
After towing, remove the towing hook from
the vehicle and stow it in the under-floor
storage compartment.
Fit the towing hook cover on the bumper.
WARNING
. Do not use the towing hook for
purposes other than towing your
vehicle.
. Be sure to remove the towing
hook after towing. Leaving the
towing hook mounted on the
vehicle could interfere with prop-
er operation of the fuel pump
shut off function when the vehi-
cle is struck from behind.
CAUTION
. To prevent deformation to the
bumper and the towing hook, do
not apply an excessive load to
the towing hook.
. For models equipped with the
BSD (Blind Spot Detection) and
RCTA (Rear Cross Traffic Alert)
driving support systems, when
towing, touch “Rear Vehicle De-
tection (BSD/RCTA)” to deacti-
vate the system. The system
– CONTINUED –
Towing
499
9
In Case of Emergency
Loading ...
Loading ...
Loading ...