Loading ...
Loading ...
Loading ...
(467,1)
北米Model "A2630BE-A" EDITED: 2022/ 12/ 23
pinched could result in injury.
1. Pull out the integrated crossbars from
the roof rail holders by pulling up the
covers.
2. Slide the bars in the direction shown in
the illustration.
3. Install the bars into the holders.
4. Make sure that the latches are fitted
securely.
! How to change the position of the
crossbar
s08aj080201
WARNING
Carefully read the warning label
attached to the roof rail.
You can change the position of the rear
crossbar. To change the position, perform
the following procedure.
1. Take out the torque wrench from the
under-floor storage compartment.
2. Remove the plastic plug of the roof rail
holder by using the torque wrench.
3. Remove the bolt of the crossbar by
using the torque wrench and pull this
side out.
– CONTINUED –
Loading Your Vehicle
465
8
Driving Tips
Loading ...
Loading ...
Loading ...