Loading ...
Loading ...
Loading ...
(263,1)
北米Model "A2630BE-A" EDITED: 2022/ 12/ 23
Models without “keyless access with
push-button start system”:
The light control switch operates when the
key is inserted in the ignition switch.
Regardless of the position of the light
control switch, the illuminated lights are
turned off when the key is removed from
the ignition switch.
NOTE
The light control switch can be oper-
ated (except auto on/off headlights)
even when under the following condi-
tions.
. When the push-button ignition
switch is turned to the “OFF” posi-
tion (models with “keyless access
with push-button start system”)
. When the key is not inserted into the
ignition switch (models without
“keyless access with push-button
start system”)
If you leave the headlights on for 10
minutes, the headlights will turn off
automatically. Turn the ignition switch
to the “ON” position to illuminate the
exterior lights again.
If the driver’s door is opened while the
headlights are illuminated under such
conditions, a chirp sound will inform
the driver that the lights are illuminated.
& Headlights
s03ah01
Except for Canada models
For Canada models
To turn on the headlights, turn the knob on
the end of the light control switch.
“
” position (except for Canada mod-
els):
The headlights are all off.
Only when the following conditions are
fulfilled, instrument panel illumination,
headlights, parking lights, front side mar-
ker lights, rear side marker lights, tail lights
and license plate lights are automatically
on or off depending on the level of the
ambient light.
. The engine is running.
. The parking brake is fully released.
. The select lever is in a position other
than the “P” position.
“OFF” position (for Canada models):
The headlights are all off.*
1
*
2
*1: When the light switch is switched to the
“OFF” position while the vehicle is stopped,
the lights turn off. Then the light switch will
automatically return to the “AUTO” position.
*2: The headlights will automatically change to
the AUTO mode when the following condi-
tions are met:
. The engine is running.
. The parking brake is fully released.
. The select lever is in a position other than the
“P” position.
“ ” position:
Instrument panel illumination, headlights,
– CONTINUED –
Light Control Switch
261
3
Instruments and Controls
Loading ...
Loading ...
Loading ...