User Manual - Page 180

For 2024 OUTBACK TOURING XT.

Loading ...
Loading ...
Loading ...
(176,1)
北米Model "A2630BE-A" EDITED: 2022/ 12/ 23
3-1. Ignition Switch (Models
without Push-Button Start
System)
s03aa
WARNING
. Never turn the ignition switch to
“LOCK” while the vehicle is being
driven or towed because that will
lock the steering wheel, prevent-
ing steering control. And when
the engine is turned off, it takes a
much greater effort than usual to
steer.
. Before leaving the vehicle, al-
ways remove the key from the
ignition switch for safety and
never allow an unattended child
to remain in the vehicle. Failure to
follow this procedure could re-
sult in injury to a child or others.
Children could operate the power
windows, the moonroof or other
controls or even make the vehicle
move.
CAUTION
Do not attach a large key holder or
key case to either key. If it banged
against your knees or hands while
you are driving, it could turn the
ignition switch from the “ON” posi-
tion to the “ACC” or “LOCK” posi-
tion, thereby stopping the engine.
Also, if the key is attached to a key
holder or to a large bunch of other
keys, centrifugal force may act on it
as the vehicle moves, resulting in
unwanted turning of the ignition
switch.
The ignition switch has four positions:
LOCK, ACC, ON and START.
NOTE
. Keep the ignition switch in the
“LOCK” position when the engine
is not running.
. Using electrical accessories for a
long time with the ignition switch in
the “ON” or “ACC” position can
cause the battery to go dead.
. If the ignition switch will not move
from the “LOCK” position to the
“ACC” position, turn the steering
wheel slightly to the left and right as
you turn the ignition switch.
& Key Positions
s03aa11
Position Description
LOCK
The key can only be inserted
or removed in this position.
The ignition switch will lock
the steering wheel when you
remove the key.
ACC
In this position the electrical
accessories (audio, acces-
sory power outlet, etc.) can be
used.
ON
This is the normal operating
position after starting the en-
gine.
START
The engine is started in this
position.
CAUTION
Do not turn the ignition switch to the
“START” position while the engine
is running.
Ignition Switch (Models without Push-Button Start System)
174
Loading ...
Loading ...
Loading ...