Loading ...
Loading ...
Loading ...
(491,1)
北米Model "A2630BE-A" EDITED: 2022/ 12/ 23
. Do not jack up the vehicle with an
object on or underneath the jack.
The jack can be unstable and this
can result in a severe accident.
. Always turn off the engine before
raising the flat tire off the ground
using the jack. Never swing or
push the vehicle supported with
the jack. The jack can come out of
the jacking point due to a jolt and
this can result in serious injury or
death.
. All passengers must exit the
vehicle before you raise it with
the jack. Raising the vehicle with
someone inside of it could result
in serious injury or death.
. Do not start the vehicle while it is
supported by the jack. Doing so
could result in serious injury or
death.
CAUTION
Do not hit and bend the disc rotor
backing plate when removing and
installing the tire. A bent backing
plate may scrape against the disc
rotor and cause noise while the
vehicle is in motion.
NOTE
Contact a SUBARU dealer when jacking
up the vehicle using a garage jack.
1. Park on a hard, level surface, when-
ever possible, then stop the engine.
2. Apply the parking brake and shift the
select lever in the “P” (Park) position.
3. Turn on the hazard warning flasher and
unload all occupants and luggage from
the vehicle.
4. Put wheel blocks at the front and rear
of the tire diagonally opposite the flat
tire.
5. Take out the jack, jack handle and
wheel nut wrench.
The tools and the spare tire are stored
under the floor of the trunk (Legacy) or
the cargo area (Outback/Subaru
Outback Wilderness). Refer to “Main-
tenance Tools” �P486.
NOTE
. Make sure that the jack is well
lubricated before using it.
. To take out the tools and spare tire,
store the cargo area cover to the
original position and open the un-
der-floor storage. Refer to “Under-
Floor Storage Compartment”
�P349.
6. Take out the under-floor storage com-
partment and turn the attaching bolt
counterclockwise, then take the spare
tire out.
– CONTINUED –
Flat Tires
489
9
In Case of Emergency
Loading ...
Loading ...
Loading ...