Loading ...
Loading ...
Loading ...
(125,1)
北米Model "A2630BE-A" EDITED: 2022/ 12/ 23
transmitted, such as a broadcast
station and power transmission
lines.
– When products that transmit
radio waves are used, such as
an access key fob or a remote
transmitter key of another vehi-
cle.
– When carrying the access key fob
of your vehicle together with the
access key fob or the remote
transmitter of another vehicle.
– When the access key fob is
placed near wireless communi-
cation equipment such as a cell
phone.
– When the access key fob is
placed near a metallic object.
– When metallic accessories are
attached to the access key fob.
– When carrying the access key fob
with an electronic appliance such
as a laptop computer.
– When the battery of the access
key fob is discharged.
. The access key fob is always com-
municating with the vehicle and is
continuously using the battery.
Although the life of the battery varies
depending on the operating condi-
tions, it is approximately 1 to 2 years.
If the battery becomes fully dis-
charged, replace it with a new one.
. If an access key fob is lost, it is
recommended that all of the remain-
ing access key fobs be reregistered.
For reregistration of an access key
fob, contact a SUBARU dealer.
. For a spare access key fob, contact a
SUBARU dealer.
. Up to 7 access key fobs can be
registered for one vehicle.
. Do not leave the access key fob in
the storage spaces inside the vehi-
cle, such as the door pocket, dash-
board or inside the corner of the
cargo area. Vibrations may damage
the key fob or turn on the switch,
possibly resulting in a lockout.
. After the vehicle battery is dis-
charged or replaced, initialization
of the steering lock system may be
required to start the engine. In this
case, perform the following proce-
dure to initialize the steering lock.
(1) Turn the push-button ignition
switch to the “OFF” position.
For details, refer to “Switching
Power Status” �P177.
(2) Open and close the driver’s
door.
(3) Wait for approximately 10 sec-
onds.
When the steering is locked, the
initialization is completed.
. Do not leave the access key fob in
the following places.
– On the instrument panel
– On the floor
– Inside the glove box
– Inside the door trim pocket
– On the rear seat
– On the rear shelf (Legacy)
– Inside the trunk (Legacy)
– In the cargo area (Outback/
Subaru Outback Wilderness)
If you do, the following situations
may occur.
– The access key fob is mistakenly
locked inside the vehicle.
– A false warning issues although
no malfunction actually occurs.
– No warning issues even when a
malfunction occurs.
– CONTINUED –
Keyless Access with Push-Button Start System
123
2
Keys and Doors
Loading ...
Loading ...
Loading ...