Loading ...
Loading ...
Loading ...
(204,1)
北米Model "A2630BE-A" EDITED: 2022/ 12/ 23
& Security Indicator Light
s03ae16
This indicator light shows the status of the
alarm system. It also indicates operation of
the immobilizer system.
! Alarm system
s03ae1601
It blinks to show the driver the operational
status of the alarm system. For detailed
information, refer to “Alarm System”
�P146.
! Immobilizer system
s03ae1602
The security indicator light starts blinking
in the following conditions.
For models with “keyless access with
push-button start system”:
. Immediately after the push-button igni-
tion switch is turned to the “OFF”
position.
. Immediately after the driver’s door is
opened or closed when all of the
following conditions are met.
– The push-button ignition switch is in
the “ON” or “ACC” position.
– The engine is not running.
In the event that an unauthorized key is
used (for example, the key is unregistered
or the ID code does not match), the power
is not switched to “ON” and the security
indicator light continues blinking.
For models without “keyless access
with push-button start system”:
. Approximately 60 seconds after the
ignition switch is turned from the “ON”
position to the “ACC” or “LOCK” posi-
tion.
. Immediately after the key is pulled out.
If the indicator light does not blink in the
above conditions, it may indicate that
immobilizer system may be malfunction-
ing. Contact your nearest SUBARU dealer
immediately.
In the event that an unauthorized key (for
example, an unauthorized duplicate) is
used, the security indicator light illumi-
nates. For details about the immobilizer
system, refer to “Immobilizer” �P136.
NOTE
. The security indicator light remains
off in the following conditions. It
means that the matching of the ID
code is completed and the immobi-
lizer system is deactivated, and it
does not indicate a malfunction.
Models with “keyless access with
push-button start system”:
– While the engine is running
– The push-button ignition switch
has been turned to the “ON” or
“ACC” position and the driver’s
door has not been opened or
closed
Models without “keyless access
with push-button start system”:
– While the engine is running
– For approximately 60 seconds
after the ignition switch is turned
from the “ON” position to the
“ACC” or “LOCK” position
– When the ignition switch is in the
“ON” position
. Even if a malfunction occurs, such
as the security indicator light
flashes irregularly, it will not affect
the functionality of the immobilizer
system.
Warning and Indicator Lights
202
Loading ...
Loading ...
Loading ...